Pre-Treatment, Rubio Monocoat Furniture Oil
Rubio Monocoat Smoke Effect
From:You may also need...

Rubio Monocoat White Wiping Rag – 1kg Pack
Product Details
Rubio Monocat Smoke Effect
RMC Smoke Effect creates a smoky effect on oak wood without any hazardous or irritating vapours being released. The product reacts to the tannic acid this is naturally present in the wood & can be applied both manually & industrially. The result varies between a shade of copper & brown.
Rubio Monocoat Smoke should always be applied in combination with a finish from the Rubio Monocoat Oil collection – this way an optimal molecular binding of the Rubio Monocoat finishing product with the wood is guaranteed.
Features
- Gives a similar effect as smoking with ammonia
- Does not irritate, does not release any toxic fumes or vapours
- Can be diluted with water if the concentration is too high
Technical Information
- Coverage: 60–100m2 per litre
- Application: Brush, Roller
- Drying Time: Touch dry in 12-48 hrs at 23°C
- Layers: As desired
- Pre Treatment: Rubio Monocoat Cleaner
- Storage: 1 Year if can kept dry & firmly shut
- VOC: 0%
Preparation
Sand the surface according to professional standards. When renovating old floors, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
Vacuum the surface and clean with Rubio Monocoat Cleaner.
Stir the product well using a stirring rod.
How to apply Rubio Monocoat Smoke
Manual Application:
- Apply Rubio Monocoat Smoke regularly using a roller or a brush. If a smooth effect is required saturate the surface completely with the product.
- Let the surface dry completely (12 to 48 hours).
- Sand the surface lightly with a polisher equipped with a beige pad.
- Remove any dust again.
- Depending on the type of wood and preparation: +/- 20 to 40 g/m2.
Mechanical Application:
- Apply Rubio Monocoat Smoke regularly using a roller or a spray gun. If a smooth effect is required saturate the surface completely with the product.
- Let the surface dry completely to the air, with a drying tunnel or UV drying.
- Sand the surface lightly with a brush sanding machine, flutter or nylon.
- Remove any dust again.
- Depending on the type of wood and preparation: +/- 5 to 15 g/m2. These usages are approximate.
Aftercare
Finish with Rubio Monocoat Oil Plus 2C. Please consult the technical data sheet of the oil for the correct application of this product!